Reason Pitch Bend

Discussion in 'Production' started by RIVMIX, Feb 19, 2008.

  1. RIVMIX

    RIVMIX New Member

    Joined:
    Feb 15, 2008
    Messages:
    24
    Likes Received:
    0
    Theres probably something real simple im missing here + it is late (excuses made), buut i have a beat made in Rsn4 using redrum connected up to compressors etc.

    I want to roll the pitch on the beat like you would be able to if you were using dr rex.
    I've combined redrum and all compressors and plugged each seperately into a line mixer, then from the line mixer too combi input and then from combi output to the mixer.
    If i roll the pitch on the combinator it does nothing..

    I dont know if there's an easier way to do this or if i'm doing it wrong altogether as i havent been doing this long..

    Hope this makes senseo_O

    Any help Appreciated
     
  2. vickvega

    vickvega Mr. Blonde

    Joined:
    Feb 27, 2007
    Messages:
    1,108
    Likes Received:
    2
    Location:
    badlands of nc.
    do you have a sequencer track for the combi unit
    it wont do it unless you do
     
  3. RIVMIX

    RIVMIX New Member

    Joined:
    Feb 15, 2008
    Messages:
    24
    Likes Received:
    0
    ok just done it, had too go into the sequencer select redrum on the key mapping then change all the sources to pitch bend and targets to drum 1-9!!! :p
    sure there must be an easier way... seems like a lot of effort..

    Thanks anyway for posting